Vol. 51 No. 2 (2026): Indian Journal of Fibre & Textile Research (IJFTR)

Published: 2026-07-03

Articles

  • Comparative analysis of structural, thermal, and electrical characteristics of virgin and recycled polyester yarns

    İlkan ÖZKAN, İlhami İLHAN
    167-175
    DOI: https://doi.org/10.56042/ijftr.v51i2.20543

  • Influence of fly ash and abaca fibre reinforcement on the mechanical and physical properties of polypropylene composites

    Ravindra Gode, Vivek Gaval, Dattatreya Kakad
    176-186
    DOI: https://doi.org/10.56042/ijftr.v51i2.21823

  • Sustainableand energy-efficient dyeing of esterase-treated polyester with reactive dyes

    Sumit Chetal, J N Chakraborty, Anilkumar Yadav
    187-198
    DOI: https://doi.org/10.56042/ijftr.v51i2.20674

  • Design and development of the angular lenticular brick motif woven fabric panels by weaving, double-layering, stitching, and foam tube wadding techniques

    R G Panneerselvam, G Mohamed Zakria, K Sankar, C Prakash
    199-209
    DOI: https://doi.org/10.56042/ijftr.v51i2.23340

  • Development of non-woven composites using agro-industrial residue fibre from Mangifera indica and analyse its comfort and thermal properties for textile application

    Ramya Nagaraj, Banu Priya Jaganathan
    210-222
    DOI: https://doi.org/10.56042/ijftr.v51i2.22124

  • Impact of fibre surface treatment on the mechanical properties of waste mulberry silk/epoxy composites

    Vivek Gaval, Rameshwari Bawankar, Sandip Sawarkar, Navin Tembhurnikar
    223-233
    DOI: https://doi.org/10.56042/ijftr.v51i2.23678

  • Phytotherapeutic textile innovations: A non-pharmaceutical  approach to sleep disorder

    Vinitha Paulose, Jayalakshmi Illangovan
    234-239
    DOI: https://doi.org/10.56042/ijftr.v51i2.24646

  • Development of granular activated carbon fabric cabin air filter

    A K Choudhary, Devendra Kumar, Lalit Jajpura, Rashi Yadav
    240-251
    DOI: https://doi.org/10.56042/ijftr.v51i2.14176

  • A Study on the influence of weave parameters on fabric fraying and performance in recycled fabrics

    R Nimisha Kamakshi, Mariyam Adnan
    252-262
    DOI: https://doi.org/10.56042/ijftr.v51i2.19413

  • Optimisation in catalysed low temperature hydrogen peroxide bleaching of cotton with different stabilizers by using design expert 6.0

    S Mishra, P B Sahoo, P B Dash, S Maiti, A Panigrahi, R V Adivarekar
    263-274
    DOI: https://doi.org/10.56042/ijftr.v51i2.15945

  • Moisture management properties of cut protective workwear

    Md. Zayedul Hasan, Rochak Rathour, Apurba Das, Ramasamy Alagirusamy, Nandan Kumar
    275-281
    DOI: https://doi.org/10.56042/ijftr.v51i2.18456

  • Investigation of thermal and mechanical protection performance of polymer coated aramid blends

    Atul Kumar, Atul Mohan, Nandan Kumar, Ankit Singhvi, Kanika Prasad
    282-291
    DOI: https://doi.org/10.56042/ijftr.v51i2.19818

  • The Effect of alkaline pretreatment on the performance of digital inkjet printing and sublimation printing on polyester and cotton-polyester blend fabrics

    Fatemeh Serajipour, Ali Shams-Nateria, Elham Hasanlou
    292-305
    DOI: https://doi.org/10.56042/ijftr.v51i2.23427

  • Assessment of the dynamic elastic recovery behaviour of seams in woven polyester fabric - The effect of stitch type and stitch length

    Nazanin Rahmati , Fatemeh Mousazadegan
    306-315
    DOI: https://doi.org/10.56042/ijftr.v51i2.12857

  • Effect of n-hexane on the physicaland mechanical characteristics of the liquid paraffin-based UHMWPE gel spun fibre

    Gyana Ranjan Behera, T V Sreekumar, Yogesh Hande , Sandeep Jape
    316-325
    DOI: https://doi.org/10.56042/ijftr.v51i2.16999