Vol. 33 No. 3 (2026): Indian Journal of Chemical Technology

Published: 2026-05-14

Contents

  • Content

    CSIR-NIScPR
    311-312
    DOI: https://doi.org/10.56042/ijct.v33i3.31518

Author Index & Keyword Index

  • Author Index & Kewyord Index

    CSIR-NIScPR
    313-314
    DOI: https://doi.org/10.56042/ijct.v33i3.31519

Articles

  • Sustainable approaches in textile dyeing sludge management: A review of emerging technologies and future perspective

    Raju Lavanya, Dhanapal Vasanth Kumar
    315-332
    DOI: https://doi.org/10.56042/ijct.v33i3.21354
  • Synthesis and characterization of pectin & xanthan / zinc oxide biopolymer-based functional films for food packaging

    Sheetal D. Deshmukh, Fasaha Ahmad, Vijay B. Pawade, Sushil U. Lokhande
    333-343
    DOI: https://doi.org/10.56042/ijct.v33i3.27878
  • Kinetic study of biosurfactant production with Pseudomonas aeruginosa MTCC 424 using residual rice bran oil as substrate

    Ashutosh Mishra, Rakesh Kumar Trivedi
    344-350
    DOI: https://doi.org/10.56042/ijct.v33i3.27343
  • Development of sustainable cementitious composites using agricultural waste and seashells

    Yennam Rajesh, Himani Chaudhari, Shraddha Pansare, Anil Kumar Thandlam, Suyog Jain, Neha Gautam, Rajasekhar Ravula
    351-357
    DOI: https://doi.org/10.56042/ijct.v33i3.25122
  • Modelling and optimization of arsenic removal from municipal water using Fe-Al deposited activated carbon derived from neem leaf waste: A response surface methodology approach

    Ashutosh Mishra, Neeta Singh, Shashank Jaiswal, Kalpana, Manoj Kumar, Dharmendra Pandey
    358-369
    DOI: https://doi.org/10.56042/ijct.v33i3.24136
  • Electrocoagulation treatment of oily wastewater using perforated electrodes: Process optimization via response surface methodology

    Rakesh Kumar, Chander Prakash
    370-381
    DOI: https://doi.org/10.56042/ijct.v33i3.26764
  • Utilizing degraded oils for eco-friendly epoxy films

    Susmita Bajpai, Rita Awasthi, Deepti Shikha
    382-390
    DOI: https://doi.org/10.56042/ijct.v33i3.23811
  • Comparative analysis of humic acid, lignin and lignite-based hydrogels for methylene blue dye removal

    Manu Nandal, Devendra Kumar, Rajinder K. Gupta
    391-400
    DOI: https://doi.org/10.56042/ijct.v33i3.20751
  • Formulation and evaluation of self nano-emulsifying mouth dissolving film of azathioprine

    Samiullah Bagwan, Kavitha, Amolkumar Kempwade, Anand Ammanage, Dhanaraj Shetty, Rohit Bhushinge
    401-412
    DOI: https://doi.org/10.56042/ijct.v33i3.20006
  • Effect of vinyl resin addition on the adhesion strength of anti-corrosion zinc-rich epoxy coating on A283 steel

    Amal Meghalet, Amel Halimi, Sofia Benamirouche, Larbi Hemmouche, Yazid Touazi, Mohamed Daia Dine Boudiaf
    413-426
    DOI: https://doi.org/10.56042/ijct.v33i3.17621
  • Influence of injection strategy and combustion chamber geometry on the performance and emissions of a bio-ethanol fuelled CRDI diesel engine

    Tamilarasan Velliyampalayam Devaraj, Ramesh Kumar Thiruppathi, Arivazhagan Sampathkumar
    427-443
    DOI: https://doi.org/10.56042/ijct.v33i3.15734
  • Influence of EMHD flow of a non-Newtonian ternary hybrid nanofluid over a variable thickness surface with thermal effects and Cattaneo-Christov heat flux: Applications in biomedical engineering

    Kaleeswari M, Kotte Amaranadha Reddy, Maduru Lakshmi Rupa, Seethi Reddy Reddisekhar Reddy, Shaik Jakeer
    444-455
    DOI: https://doi.org/10.56042/ijct.v33i3.21958
  • Experimental investigation on performance and emission analysis of the higher alcohol-blended water-emulsified waste cooking oil biodiesel in an IC engine

    B. Maharajan, P. Madhu, C. Sowmya Dhanalakshmi, R. Vijayakumar
    456-472
    DOI: https://doi.org/10.56042/ijct.v33i3.25970
  • Numerical attribution of bioconvection magnetised electrical flow of thermal radiation in a nanoliquid with thermal/solutal convective curve surface

    Agha Yasir Ali, Syed Sohaib Zafar, Farhan Ali, M. Faizan Ahmed, Dana Mohammad Khidhir, Hamed Ould Sidi
    473-484
    DOI: https://doi.org/10.56042/ijct.v33i3.17347
  • Application of native Parthenium hysterophorus for dye sequestration: Kinetic, isotherm, and thermodynamic analysis

    Suyog N. Jain, T. H. Upasani, A. N. Kavhar, Ravula Rajasekhar, Yennam Rajesh, Gaurav Daware, S.N. Derle, Neha Gautam, Piyush Joshi
    485-492
    DOI: https://doi.org/10.56042/ijct.v33i3.27080