Parametric Study of CPT Resonance in Rubidium Vapor Cell for Application in Atomic Clock

Authors

  • Rajaiah Kaitha U.R. Rao Satellite Centre, Indian Space Research Organisation, Bangalore-560 017, India
  • Manjula R Laboratory for Electro-Optics Systems, Indian Space Research Organisation, Bangalore-560 058, India
  • Pragya Tiwari Laboratory for Electro-Optics Systems, Indian Space Research Organisation, Bangalore-560 058, India
  • Minni J Kappen Laboratory for Electro-Optics Systems, Indian Space Research Organisation, Bangalore-560 058, India
  • Shubhajit Biswas Laboratory for Electro-Optics Systems, Indian Space Research Organisation, Bangalore-560 058, India
  • Bijoy Raha Laboratory for Electro-Optics Systems, Indian Space Research Organisation, Bangalore-560 058, India
  • Swarupananda Pradhan Bhabha Atomic Research Centre, Mumbai-400 085, India
  • Venkatappa Rao Tumu Department of Physics, National Institute of Technology, Warangal, Telangana-506 004, India
  • Umesh S B Laboratory for Electro-Optics Systems, Indian Space Research Organisation, Bangalore-560 058, India
  • Elumalai S Laboratory for Electro-Optics Systems, Indian Space Research Organisation, Bangalore-560 058, India
  • Kalpana Arvind P Laboratory for Electro-Optics Systems, Indian Space Research Organisation, Bangalore-560 058, India
  • Sriram K V Laboratory for Electro-Optics Systems, Indian Space Research Organisation, Bangalore-560 058, India
  • Prashanth C Upadhya Laboratory for Electro-Optics Systems, Indian Space Research Organisation, Bangalore-560 058, India

DOI:

https://doi.org/10.56042/ijpap.v60i6.61376

Keywords:

Atomic clock, Coherent Population Trapping, Quality figure, Frequency stability, Wall collision, Propagation effect

Abstract

The performance of Coherent Population Trapping (CPT) based atomic clocks primarily depends on the characteristics of CPT resonance. We have performed experiments to study and optimize the characteristics of CPT resonance in 87Rb atoms by measuring its contrast and full-width-at-half maximum (FWHM) as function of laser excitation and temperature of atomic vapor cells with different dimensions. A four-level atomic model is used to simulate CPT resonance characteristics along the length of atomic vapor cell. The model incorporates scaling law to understand collision dynamics in cells with different radius for a range of laser excitation intensities and the results are compared with experimental data. The quality figure, calculated from the measured values of FWHM and contrast, decreases with increase in laser intensity and improves in cells with higher dimension (radius). The optimum temperature corresponding to maximum quality figure varies with laser excitation intensity as well as cell dimension. The underlying collision dynamics and density effects that are responsible for the observed resonance characteristics are discussed.

Downloads

Published

2023-06-13

How to Cite

Parametric Study of CPT Resonance in Rubidium Vapor Cell for Application in Atomic Clock. (2023). Indian Journal of Pure & Applied Physics (IJPAP), 60(6). https://doi.org/10.56042/ijpap.v60i6.61376

Similar Articles

1-10 of 242

You may also start an advanced similarity search for this article.