Vol. 31 No. 2 (2024): IJEMS-APRIL 2024

Published: 2024-06-26

Review Articles

  • Nano-structured gas sensing materials for ammonia detection with special emphasis on medical applications

    Sithikraja R, Karen Das, Priyanka Kakoty
    167-181
    DOI: https://doi.org/10.56042/ijems.v31i2.4852

Articles

  • Numerical investigation on Williamson nanoflow past a cylinder imbedded in an absorbent media with energy source/sink: Keller Box simulation

    Vinoth Kumar B, Poornima Tamalapakula
    182-192
    DOI: https://doi.org/10.56042/ijems.v31i2.6841

  • Application of AHP and TOPSIS for the evaluation of Indian railway supply chain parameters

    Manoj Kumar, Vipin, Ashish Agarwal
    193-207
    DOI: https://doi.org/10.56042/ijems.v31i2.2109

  • Exploring incisive decision for performance assessment of materials under utopian environment: A pluri-disciplinary approach

    Manik Chandra Das, Bijan Sarkar
    208-223
    DOI: https://doi.org/10.56042/ijems.v31i2.2115

  • Comprehensive study of cost, seismic & wind impacts on circular water tanks with varying cylindrical height-to-diameter ratio

    Sukanya Saxena, Krishna Kant Pathak
    224-231
    DOI: https://doi.org/10.56042/ijems.v31i2.5368

  • Flexural behaviour of indigenous natural rubber cored novel sandwich structure- An experimental approach

    Krishanu Gupta, Prasun Chakraborti
    232-244
    DOI: https://doi.org/10.56042/ijems.v31i2.1164

  • Aerodynamic and aeroelastic response of wind barrier over trapezoidal box girder bridge under turbulence wind

    Puja Haldar, Somnath Karmakar
    245-257
    DOI: https://doi.org/10.56042/ijems.v31i2.1034

  • Epoch event based speech watermarking for tamper detection

    Rajeev Kumar, Jainath Yadav
    258-269
    DOI: https://doi.org/10.56042/ijems.v31i2.942

  • Development and characterization of Fe500S TMT Rebars

    Ishwari Narain Choudhary, Vikash Kumar, Ratnesh Kumar Gupta, Nitesh Kumar Sinha, Jayant Kumar Singh
    270-275
    DOI: https://doi.org/10.56042/ijems.v31i2.1515

  • Experimental investigation on abrasive flow finishing of FDM printed polymeric spur gear

    Rajhans Meena, Ch Sandeep, Piyush Singhal, Kuldeep Kumar Saxena, Harlal Singh Mali
    276-283
    DOI: https://doi.org/10.56042/ijems.v31i2.623

  • Chemiresistive room temperature methanol sensing by chemically synthesized CdSe/ZnO nanocomposites

    Pallabi Boro, Pratyush Phukan, Sultana Rijuwana Haque, Suparna Bhattacharjee
    284-296
    DOI: https://doi.org/10.56042/ijems.v31i2.4238

  • Simultaneous optimization of WEDM parameters for CPOH steel by central composite design

    Sule Meryem Ceylan, Yeliz BURUK SAHIN, Ezgi AKTAR DEMİRTAS
    297-307
    DOI: https://doi.org/10.56042/ijems.v31i2.6196

  • Finite element stress analysis of squeeze-off of polyethylene pressure pipes

    Pasa Yayla
    308-318
    DOI: https://doi.org/10.56042/ijems.v31i2.1967