Comparative analysis of residual pressure drop behavior between electrostatically assisted flat based and pilot pulse jet filter unit using conductive filter media

Abstract

The present study aims at comparing the pressure drop behavior of three different needle-punched polyester conductive
materials, viz. PTFE coated media, stainless steel fibre blended with PET media and stainless steel fibre scrim media. This
comparison is done on a laboratory-based electrostatically assisted pulse-jet flat media test rig with the pilot filter unit,
which is closer to the industrial set-up. The materials are investigated using fly ash aerosol, pre-charged at three different
levels of charge, viz. 4 kV, 8 kV and 12 kV. The interpretations reveal that the flat media test rig is observed to exhibit
lower residual pressure drop for all the investigated materials.