Vol. 48 No. 4 (2023): Indian Journal of Fibre & Textile Research

Published: 2024-01-05

Articles

  • Effect of coconut shell powder filler on performance of polyester composites for ballistic application

    G Maheswaran, R Murugan, Abhijit Majumdar
    367-372
    DOI: https://doi.org/10.56042/ijftr.v48i4.7635

  • A feasibility study on use of banana fabrics in footwear production as upper material

    Rajesh Chengamchetty Murali, Ambika Kumaresan, Bharath kumar Gunasekaran, Kavati Phebe Aaron, Krishnaraj Kaliappa
    373-379
    DOI: https://doi.org/10.56042/ijftr.v48i4.7636

  • Comparative analysis of residual pressure drop behavior between electrostatically assisted flat based and pilot pulse jet filter unit using conductive filter media

    Sudev Dutta, Arunangshu Mukhopadhyay, A K Choudhary, C C Reddy
    380-387
    DOI: https://doi.org/10.56042/ijftr.v48i4.7638

  • Development of fabrics for adsorbing carbon dioxide and other pollutants from indoor air

    Arindam Basu, Pankaj Kumar, MS Parmar, MS Parmar, RK Gaur
    388-395
    DOI: https://doi.org/10.56042/ijftr.v48i4.7639

  • Multi-response optimization of wear parameters of flax reinforced epoxy composites using Taguchi-GRA-PCA approach

    R Rajiev, S M Vinu Kumar, Harwinder Singh, E Sakthivelmurugan
    396-408
    DOI: https://doi.org/10.56042/ijftr.v48i4.7640

  • Developing a rheological model for predicting stress relaxation behavior of cotton-covered elastane core-spun yarns

    H Helali, A Babay, B Jaouachi, M Chikhrouhou
    409-418
    DOI: https://doi.org/10.56042/ijftr.v48i4.7644

  • Influence of different gauge length and strain rate parameters on tensile properties of Kevlar® 29 yarn

    D Kamal Raj, V Subramaniam, Shubham Joshi, S Sindhuja, S Sneha
    419-424
    DOI: https://doi.org/10.56042/ijftr.v48i4.7645

  • Influence of fabric structure and loop length on thermal comfort properties of cotton/polyester knitted fabrics

    V Mahalakshmi, K M Pachiayappan, S M Udaya Krithika, K Mani, C Prakash
    425-431
    DOI: https://doi.org/10.56042/ijftr.v48i4.7646

  • Developing faded denim using surface-modified disperse dye dyeable cotton yarn

    M S Parmar, Durgesh Raj Maurya, Nidhi Sisodia
    432-441
    DOI: https://doi.org/10.56042/ijftr.v48i4.7647

  • Hydrophobicity and antibacterial property of silica sol-chitosan-HDTMS treated silk fabric

    Prasanta Das, Manas Datta Roy, Subrata Ghosh
    442-449
    DOI: https://doi.org/10.56042/ijftr.v48i4.7651

  • Effect of air plasma treatment on thermal comfort properties of cotton/polyester knitted fabrics

    V Mahalakshmi, KM Pachiayappan, C Prakash, A Jebastin Rajwin
    450-455
    DOI: https://doi.org/10.56042/ijftr.v48i4.7653

  • Azadirachta indica and Punica granatum rind treatment on linen fabric with plasma finish and exhaustion method

    Prafull P Kolte, Vijay S Shivankar, Nilesh Malthane, C Prakash
    456-462
    DOI: https://doi.org/10.56042/ijftr.v48i4.7655

Short Communication

  • Effect of fibre, plating and loop length variation on fabric tactile comfort

    P C Shobanasree, C Prakash, M Ramesh Kumar
    463-470
    DOI: https://doi.org/10.56042/ijftr.v48i4.7656

  • Extraction and characterization of marigold bast fibre

    Omkar R Sadalkar, Pooja M Katkar, Suhas D Asagekar
    471-474
    DOI: https://doi.org/10.56042/ijftr.v48i4.7660

Review Paper

  • Flame retardant finishing of textiles – A comprehensive review

    Palak Kakar, Ankit Singh, Javed Sheikh
    475-494
    DOI: https://doi.org/10.56042/ijftr.v48i4.7662