Moisture management properties of cellulose single jersey fabrics

Authors

  • P C Shobanasree Department of Handloom and Textile Technology, Indian Institute of Handloom Technology, Salem 636 001, India
  • C Prakash Department of Handloom and Textile Technology, Indian Institute of Handloom Technology, Fulia 741 402, India
  • M Ramesh Kumar Department of Fashion Technology, Sona College of Technology, Salem 636 005, India

DOI:

https://doi.org/10.56042/ijftr.v48i3.6054

Keywords:

Comfort, Knitted fabrics, Loop length, Moisture management, Plating, Single jersey fabric, Cellulosic fabric, Tencel

Abstract

Modified cellulose (tencel, modal and bamboo) lycra plated single jersey knitted fabrics have been developed with two
different loop lengths (2.7mm and 3.4mm) and with different lycra plating (without plating, half plating and full plating),
along with the cotton fabrics of same variables. The test results of moisture management properties prove that the overall
moisture management capability (OMMC) values of 3.4mm tencel fabric without lycra have the highest value and exhibit an
excellent grade in the moisture management test (MMT) chart. This is attributed to the low wetting time, higher bottom
absorption rate, higher value of maximum wetted radius and spreading speed and accumulative one-way transport index
(AOTI) value. It is also found that the value of OMMC decreases with the increase in elastane content and increases with the
increase in loop length. Further, it is also observed that all the developed fabrics fall under the category of good to excellent
grades in MMT indices.

Downloads

Published

2023-10-10

How to Cite

Moisture management properties of cellulose single jersey fabrics. (2023). Indian Journal of Fibre & Textile Research (IJFTR), 48(3), 287-294. https://doi.org/10.56042/ijftr.v48i3.6054

Similar Articles

11-20 of 112

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)