Vol. 33 No. 02 (2026): IJEMS-APRIL

Published: 2026-08-12

Review Articles

Evaluating line source emission models for Indian urban environments

Rahul Vyawahare, Kariampallil Varghese George, Prashant Gargava

143-159
- PDF
DOI: https://doi.org/10.56042/ijems.v33i02.24343

Articles

Design and experimental validation of a hexagonal split-ring resonator sensor formicrowave dielectric characterization of liquids

Amit Birwal, Ariba Ali, Kamlesh Patel

160-168
DOI: https://doi.org/10.56042/ijems.v33i02.29497
Comparative performance evaluation of diesel, Amoora rohituka and Calophylluminophyllum biodiesel-ethanol blends in a compression ignition engine

Jyothika Rani Appana, Shashidhar H Badami, Prasad Purushottam Gheware, Rujuta Rajendra Donadkar

169-175
- PDF
DOI: https://doi.org/10.56042/ijems.v33i02.25979
Structural analysis and classification of silver–graphene oxide (Ag-GO)nanocomposites using SAM-based segmentation and machine learning models

Parashuram Bannigidad, Sagar Chingali, Prabhuodeyara Gurubasavaraj

176-183
DOI: https://doi.org/10.56042/ijems.v33i02.23314
Predicting the optimal composition of sugarcane bagasse ash (SCBA) and groundgranulated blast furnace slag (GGBS) in ternary blended supplementarycementitious system

Shahas Shahul, Girija Krishnamma, Nazeer Mytheenkunju

184-192
- PDF
DOI: https://doi.org/10.56042/ijems.v33i02.22144
Investigating the effect of non-uniform ceramic dispersion on the mechanical properties of hybrid Al-Cu composite via powder metallurgy route

Venkatesh Sivakumar Meenatchi, Omprabba Kannan Chandramohan, Ramanaa Tharani, Venkatesan Muniyandi

193-199
- PDF
DOI: https://doi.org/10.56042/ijems.v33i02.23625
Experimental study on partial replacement of concrete constituents withdemolition wastes and carbon compounds

Sougata Banerjee, Manish Jangid, Bhupendra Singh Chauhan

200-205
- PDF
DOI: https://doi.org/10.56042/ijems.v33i02.23287
Performance, emission, and optimization of CuO-doped ternary biodiesel in CI engines

Elango Murugesan, Coumaressin Thangarasu, Saravanan Mohan, Parthasarathi Mishra

206-222
- PDF
DOI: https://doi.org/10.56042/ijems.v33i02.19823
Design optimization of cold storage for agricultural product using corner curvatureand thermal backup system: A case study on brinjal and tomato

Milind Sadashiv Swami, Manoj Dahake, Manish Deshmukh, Priya Gajjal, Chandrakishor Ladekar

223-242
- PDF
DOI: https://doi.org/10.56042/ijems.v33i02.21955
Optimization of Rooftop PV Layouts in Baghdad Using 3D Shading and PVsyst with Energy-Density Approach

Walla Kareem Musa, Alaa Hussien Shneishil

243-251
- PDF
DOI: https://doi.org/10.56042/ijems.v33i02.29179