Vol. 31 No. 1 (2024): IJEMS-FEBRUARY 2024

View Vol. 31 No. 1 (2024): IJEMS-FEBRUARY 2024
Published: 2024-04-18

Review Articles

  • Conventional system to deep learning based indoor positioning system

    Shiva Sharma, Naresh Kumar, Manjit Kaur
    7-24
    DOI: https://doi.org/10.56042/ijems.v31i1.5183

  • Proposal of En19 & En24 steels to face major challenges in indigenized track maintenance machines for Indian railway

    Manas Pandey, Prasanta Kumar Mohanta, Soni Kumari, Nikhil Kumar
    25-37
    DOI: https://doi.org/10.56042/ijems.v31i1.554

  • Growth of Indian cement industry, its environment impact and emerging alternatives: A Review

    Vedansh Mudgal, Aarthy Chellasamy
    38-50
    DOI: https://doi.org/10.56042/ijems.v31i1.7145

Articles

  • A comparative investigation for flatness and parallelism measurement uncertainty evaluation using laser interferometry and image processing

    Girija Moona, Abhishek Singh, Sunder Bishnoi, Anju, Vinod Kumar, Rina Sharma, Harish Kumar
    51-57
    DOI: https://doi.org/10.56042/ijems.v31i1.4887

  • Optimization of friction stir welding process parameters for HDPE sheets using satisfaction function approach

    Amit Muchhadiya, Abhishek Kumar, Soni Kumari, Kuldeep Kumar Saxena, Din Bandhu, Jay Vora, V Phaninder Reddy, Navajyoth B
    58-66
    DOI: https://doi.org/10.56042/ijems.v31i1.561

  • Experimental study on carbonation depths of OPC and PPC concrete by conventional and advanced methods

    Shashi Kumar, Alok Ranjan, Rajesh Kumar, Devendra Mohan
    67-75
    DOI: https://doi.org/10.56042/ijems.v31i1.2190

  • Prediction of pipe geometry influenced by various suction pressure

    P Phani Prasanthi, T Srinag, Vallabhaneni Venkata Venu Madhav, Manoj Kumar Agrawal, Indradeep Kumar, Kuldeep Kumar Saxena, Navajyoth B
    76-83
    DOI: https://doi.org/10.56042/ijems.v31i1.586

  • Development and validation of test rig for experimental analysis of contact behavior between rail wheel-rail and rubber tire-rail in road cum rail vehicles

    Sharad K Pradhan, Arpit Singh Rathore, Shankar Sehgal, Pankaj Sonia, Gandikota Ramu, Chander Prakash
    84-92
    DOI: https://doi.org/10.56042/ijems.v31i1.986

  • XPS analysis of oxidized Fe based alloy ribbons

    Nirmalya Karar
    93-107
    DOI: https://doi.org/10.56042/ijems.v31i1.6444

  • Adjustable link twist angle coupling for re-configurable manipulator

    Ashwani Kumar Kushwaha, Ekta Singla, Anupam Agrawal
    108-112
    DOI: https://doi.org/10.56042/ijems.v31i1.6128

  • Investigations of process parameters on surface finish of aluminium component produced by die sink electric discharge machining process

    Vigneswaran Chidambaram, Mohanraj Ramasamy, Nandhini Karthika Saravanan, Vinu Devan
    113-123
    DOI: https://doi.org/10.56042/ijems.v31i1.2186

  • The production of structural concrete and the effects of various waste materials on concrete used as partial replacements for cement

    Samreen Bano, Neha Mumtaz, Farheen Bano, Vikash Singh, Aqeel Ahmad
    124-136
    DOI: https://doi.org/10.56042/ijems.v31i1.4246

  • Device modelling of tin based perovskite solar cell with distinct hole transport layer material

    Anshul Agarwal, Nitesh Kumar Singh
    137-143
    DOI: https://doi.org/10.56042/ijems.v31i1.782

  • Optimization of rheological properties of granular sub-base using cement stabilization

    Pratibha Bagaria, Karanjeet Kaur, Vimal Kr Gehlot
    144-151
    DOI: https://doi.org/10.56042/ijems.v31i1.662

  • Computer vision of microwave treated red kidney beans (Rajma)

    Chitra Gautam
    152-158
    DOI: https://doi.org/10.56042/ijems.v31i1.2067