Vol. 49 No. 3 (2024): Indian Journal of Fibre & Textile Research

Published: 2024-10-08

Articles

  • Development of thermal layer using low twist yarns and roving of aramids and FR viscose blend

    Shweta Chauhan, M S Parmar, Nidhi Sisodia
    289-296
    DOI: https://doi.org/10.56042/ijftr.v49i3.3657

  • Dyeing of pashmina wool using Butea monosperma flower extract

    Harshal Patil, Atharva Patil, Ashok Athalye
    297-303
    DOI: https://doi.org/10.56042/ijftr.v49i3.4331

  • Influence of superabsorbent fibre in cotton web on absorption of saline solution

    Rupali Dhiman, R Chattopadhyay
    304-310
    DOI: https://doi.org/10.56042/ijftr.v49i3.735

  • Selection of raw material parameters for multi-response optimization of cotton yarn qualities

    Subhasis Das, Anindya Ghosh
    311-317
    DOI: https://doi.org/10.56042/ijftr.v49i3.1185

  • Critical characterization of low porosity ripstop parachute canopies using smallscale impact and quasi-static loading principle

    Kumari Neha, Monica Sikka, Gyana Ranjan Behera
    318-324
    DOI: https://doi.org/10.56042/ijftr.v49i3.12508

  • Effect of bamboo/silk blending on moisture management characteristics of fabrics

    T S Geethanjali, C Prakash, V Ramesh Babu, J Hayavadana, G K Indu, Vibha Kapoor, Vibha Kapoor, A Jebastin Rajwin
    325-329
    DOI: https://doi.org/10.56042/ijftr.v49i3.12503

  • Influence of sewing thread fineness and seam type on thermal properties of seams

    M Maanvizhi, C Prakash, V Ramesh Babu
    330-336
    DOI: https://doi.org/10.56042/ijftr.v49i3.12500

  • Dyeing of jute with annatto seeds and other natural dyes No subtitle

    Ritwik Chakraborty, Ashis Kumar Samanta, Padma Shree Vankar
    337-343
    DOI: https://doi.org/10.56042/ijftr.v49i3.2498

  • Influence of weave structure on mechanical properties of cotton fabrics reinforced with unsaturated polyester

    H C Obasi, U E Enwerem, G C Onuegbu, S C Nwanonenyi, R S Odera
    344-351
    DOI: https://doi.org/10.56042/ijftr.v49i3.12513

  • Effect of directional loading on mechanical performance of HDPE warp knitted mesh fabric

    Sandeep Kumar Maurya, Ravikant Prasad, Viraj Uttamrao Somkuwar, Jayashree Mohanty, Apurba Das, Bipin Kumar
    352-359
    DOI: https://doi.org/10.56042/ijftr.v49i3.12512

  • Structural effect of weft knitted pressure garments on applied pressure and thermal comfort properties

    Mahsa Pourmohammad, Hossein Hasani
    360-369
    DOI: https://doi.org/10.56042/ijftr.v49i3.12515

  • Flame retardancy of cotton fabric using sustainable tree gum

    J J Gayathri, K Kalaiarasi
    370-378
    DOI: https://doi.org/10.56042/ijftr.v49i3.663

  • Woven face mask made from CoolMax fibres with three layers

    Mujallid Rasha Samer Mohammad
    379-384
    DOI: https://doi.org/10.56042/ijftr.v49i3.12517

  • Effects of sewing thread filament fineness on moisture management properties of seams

    M Maanvizhi, C prakash, V Ramesh Babu
    385-392
    DOI: https://doi.org/10.56042/ijftr.v49i3.12521